>MTM Trapezium Mill Working Principle

This Grinding mill is widely used in many industrial fields, such as building, chemical, chemical fertilizer, metallurgy, mining, nonmetal, abrasive, bearing materials, ceramic, steel, thermal power, bricks & tiles, coal industry, etc. It can grind these materials which are 9 or less on the Meshes scale, and moisture is below 6%., and they should be non-explosive and non-flammable mining materials. The final size can be adjusted from 30 to 400 meshes easily. There are thousands of materials our machine can grind. The typical materials are cement (raw meal and cement clinker), quartz, feldspar, calcite, gypsum, limestone, dolomite, graphite, fluorite, aedelforsite, phosphate ore, fused calcium-magnesium phosphate, car amide, electrolytic manganese metal, ferromanganese, coal, gangue, slag, zirconium, steatite, granite, orthoclase, marble, barites, ceramics, glass, etc.

Main unit runs with the central shaft that is driven by a decelerator. The top of the shaft is connected with a quincunx stand, on which a grinding roller is installed to form a swing support. The grinding roller not only rotates around the central axle and grinding roller, but also rotates around its own axle due to the friction. There is pallet knife system at bottom of quincunx stand. The pallet knife system is under the grinding roller. With co-rotation of pallet knife and grinding roller, pallet knife will lift the materials into the space between roller and ring to form a material layer. The materials will grinded due to centrifugal force of roller.
The classifier drives the impellers on the tray to rotate through speed adjusting motor, so that powder can be separated. The standard particles will enter cyclone collector. After being separated from the air flow, powder will be collected. Substandard particles will be thrown to the outside wall, to be separated from the air flow. Heavy powder will fall into the grinding chamber to regrind due to self gravity.